Search
Submit
Close
News News
/
/
/
Do you know the material of plastic flower pots?

Do you know the material of plastic flower pots?

  • Categories:Trade News
  • Time of issue:2022-01-19 11:18
  • Views:

(Summary description)
  When it comes to plastic flower pots, many of my friends' impressions are on novel and beautiful shapes and colorful colors, but I don't know if you have paid attention to the production materials of plastic flower pots? The manufacturer will give you a brief introduction next.

  The white plastic flower pots we usually see are made of PVC, PP and PE. However, there are many colors of plastic flower pots. What materials are those blue, yellow, red, and pink plastic flower pots made of? First of all, ABS plastic, which is the most commonly used material for straight flower pots. The advantage is that the price is lower than that of the PA flowerpot, but it is relatively brittle and has poor impact strength, and is mostly used as a telephone casing and a TV casing.

  Nylon can also be used to make flower pots because of its strength and moisture absorption, but its price is nearly double that of ABS. In addition, high-pressure polypropylene material can also be used to make plastic flower pots, which have low toxicity, good high temperature and low temperature resistance, and low cost.

Do you know the material of plastic flower pots?

(Summary description)
  When it comes to plastic flower pots, many of my friends' impressions are on novel and beautiful shapes and colorful colors, but I don't know if you have paid attention to the production materials of plastic flower pots? The manufacturer will give you a brief introduction next.

  The white plastic flower pots we usually see are made of PVC, PP and PE. However, there are many colors of plastic flower pots. What materials are those blue, yellow, red, and pink plastic flower pots made of? First of all, ABS plastic, which is the most commonly used material for straight flower pots. The advantage is that the price is lower than that of the PA flowerpot, but it is relatively brittle and has poor impact strength, and is mostly used as a telephone casing and a TV casing.

  Nylon can also be used to make flower pots because of its strength and moisture absorption, but its price is nearly double that of ABS. In addition, high-pressure polypropylene material can also be used to make plastic flower pots, which have low toxicity, good high temperature and low temperature resistance, and low cost.

  • Categories:Trade News
  • Time of issue:2022-01-19 11:18
  • Views:
Information

  When it comes to plastic flower pots, many of my friends' impressions are on novel and beautiful shapes and colorful colors, but I don't know if you have paid attention to the production materials of plastic flower pots? The manufacturer will give you a brief introduction next.

  The white plastic flower pots we usually see are made of PVC, PP and PE. However, there are many colors of plastic flower pots. What materials are those blue, yellow, red, and pink plastic flower pots made of? First of all, ABS plastic, which is the most commonly used material for straight flower pots. The advantage is that the price is lower than that of the PA flowerpot, but it is relatively brittle and has poor impact strength, and is mostly used as a telephone casing and a TV casing.

  Nylon can also be used to make flower pots because of its strength and moisture absorption, but its price is nearly double that of ABS. In addition, high-pressure polypropylene material can also be used to make plastic flower pots, which have low toxicity, good high temperature and low temperature resistance, and low cost.

Scan the QR code to read on your phone

Related News

Magnesia composite material series
Magnesia composite material series
Magnesia composite material series
2023-01-05
What is wheat straw made of
What is wheat straw made of
What is wheat straw made of
2022-10-28
How to deal with the sunburn of Crassula Arborescens
How to deal with the sunburn of Crassula Arborescens
Crassula Arborescens, is known as Sedum pachyphyllum. It is a succulent shrub of the genus Cyclosaurus of the Crassulaceae family. It is native to tropical Africa and is evergreen all the year round.A flower friend recently asked, "Some leaves of my Crassula Arborescens seem to have dried out in recent days. Are they sunburnt?" What should we do if it gets sunburnt? Is there a good way to deal with it? The following flower information introduces the causes of Crassula Arborescens sunburn and the treatment methods of Crassula Arborescens sunburn, which is only for the reference.   Generally, there are several situations that cause the leaves of Crassula Arborescens to dry, but it is not entirely due to sun exposure. It may be caused by lack of ventilation, too much watering and too much fertilizer.   Treatment of Crassula Arborescens sunburn   1. The suitable temperature for the growth of Crassula Arborescens is 20-30 ℃. Spring and autumn are suitable for growth periods. Shade or place under the shade of trees when it is hot in summer to avoid direct sunlight. When the temperature exceeds 38 ℃, it grows slowly or enters into temporary dormancy.   In winter, it should be put in the greenhouse or in a sunny place indoors. The room temperature should be kept at 7-10 ℃, and the temperature should not be lower than 5 ℃. If it is below 0 ℃, it will be frozen to death. During the growth period, except for the need for shade in hot summer, it should be placed in a sunny place.   2. During the growth period of Crassula Arborescens, water once every 2-3 days, but do not make the soil too wet, let alone water. When it is hot in summer, watering shall be strictly controlled and ventilation shall be strengthened, otherwise it is easy to cause fallen leaves. In winter, water should be reduced, and the pot soil should be slightly dry. Watering gradually decreases in autumn. During outdoor cultivation, it is necessary to avoid rain washing, otherwise excessive water in the root will easily cause root rotting and death.   [Tips] When Crassula Arborescens gets sunburnt, it should first be kept in a light scattering place for a period of time, and then directly bask in the sun. Crassula Arborescens likes loose sandy culture soil, and avoids too wet soil. If the pot soil is too wet, and the ventilation is poor, it is easy to lose leaves. When it is hot in midsummer, Crassula Arborescens is in a semi dormant state. It is OK not to water it for many days. Besides, fertilization should be stopped, and ventilation should be paid attention to to prevent the leaves from becoming sunburnt.
2022-10-17
How do beginners choose flowers?
How do beginners choose flowers?
The novice flower growers have no experience in purchasing and maintaining flowers.They are easy to be perceptual when purchasing.They choose some flowers with high ornamental value and bright colors,such as orchids,azaleas,milan,daphne,fuchsia,common anthurium,etc.This kind of flowers is often difficult to maintain,and the the requirements for various elements of temperature,light,soil and fertilizer are very high.In case of death,it will not only cause economic losses,but also undermine self-confidence.The beginners can choose the following types of flowers to raise. First,wet loving or moisture resistant flowers,such as fishscale bamboo,monstera,rohdea japonica,impatiens,ferns,etc.The most common problem for beginners is that they don’t know how to water well,and they are likely to overdo their work.However,as long as the wet loving or moisture resistant flowers do not accumulate water for a long time or often,they are generally not easy to be watered to death. Second,drought tolerant plants,such as echinocactus gruson,aloe,sansevieria,agave americana,cactus,etc.This kind of flower has strong vitality and is easy to survive.It is also not easy to die after a long drought. Third,there are some plants for beginner’s training,they are cheap and easy to raise.This kind of plant is also survive,with simple maintenance points and low price.It can enable beginners to gradually understand flower habits in practice,form a preliminary understanding of the five elements of temperature,light,water,soil and fertilizer,and accumulate experience in flower cultivation.For example,chlorophytum,epipremnum aureum,dianthus chinensis,cotyledon tomentosa,impatiens holstii engler et warb,crassula arborescens,pharbitis nil,brunfelsia acuminata,peperomia tetraphylla,astridia velutina,portulacaria afra,stapelia pulchella,othonna capensis,kalanchoe blossfeldiana,cactus,bryophyllum pinnatum,lucky bamboo,scutellaria barbata,etc.,
2022-10-10
Hwasu

Tel:18065695529

Address:workshop 6# of Wancheng Plastic Industry, Xiazhuang Industrial Zone, Chengxi Town, Longhai City, Fujian Province

Copyright © 2021 Zhangzhou Hwasu Plastic Co.,LTD   闽ICP备2021015443号